Mold inspection is when a team of professionals look for mold growth in a building. It is always recommended to get a mold inspection done once in a while. There are quite good reasons for mold inspections. if you have an allergic reaction such as a runny nose or itchy eyes associated with being in a certain room or building it might be due to mold growth. It is also done to verify that sources of moisture that have been successfully stopped and that no residual mold growth has been left after unknown water and mold problem has been fixed. mold inspection is important to confirm that there is not an existing moisture and old mold problem associated with the new building or home that you are planning to rent or purchase.
If you have decided to get a mold inspection done, here are a few things you should keep in mind.
- Mold inspections need to be performed by a qualified mold inspector.
The inspection should always be done by a professional who has formal training and experience. One needs proper knowledge and training to be a mold inspector.
- Mold inspections should look for evidence of past or current mold growth
During the inspections, the inspector looks for the evidence of past or current mold growth. If there is past mold growth it may indicate a water problem that might come back if certain conditions are not taken care of. The past mold can also cause problems to individuals such as allergic reactions, etc.
- Mold inspection should look for mold within the building, inside walls, and in other areas.
When you are getting the mold inspection done, you have to make sure that the mold inspector looks around the most prone and vulnerable areas. the areas where mold growth is undesirable should not be ignored. Sometimes the mold growth can cause structural issues such as wood decay in crawl spaces; hence, all the areas should be checked thoroughly.
- Some mold growth in the building is perfectly normal.
You should know that mold growth is natural and perfectly normal. For instance, the Ceratosystis and Ophiostoma are two types of molds that grow on lumber, known as lumber yard mold. They can be frequently found growing on two by four or on the other structural framing within the building. These molds usually grow on the sap of wood and stop growing once the wood becomes dry. However, they end up causing black staining on the wood but do not cause any problems like structural issues. If the inspector finds black staining on the wood, they should take a sample and send it to the mold testing lab for analysis to determine if it is one of these molds.
- The molding inspector looks for sources of moisture
It is a well-known fact that mold growth happens because of water. Without the source of water, you will not have mold growth. Thus, one of the best ways to prevent and stop mold growth is to eliminate its source. The importance of looking for sources of moisture should not be ignored and must be included.

Angelique Chrisafis is the Guardian’s Paris correspondent. She is responsible for churning out quality articles based on her research while keeping an eye on the tech world. She likes technology, gadgets, and food. Works as an individual contributor to the team.