Why my central heating pump is creating rattling noises?
When the central heating systems are turned off for a long period, it can get jammed very easily which results in damaging its interior. You might face this issue in the upcoming winter seasons as the summer months bring these heating systems in an utter faulty condition. A lot of central heating problems can be fixed with the help of some DIY methods. It can save a lot of money! You should be checking your central heating pump at home at least once a year. Such investigations would lead you to be informed about the potential damages and it will prepare you for a further mess.
If you ever encounter the strange noise of your central heating system, don’t ignore them. A quick investigation into the problem can solve the issue quickly. If you delay the issue, it might turn into something that would be unavoidable and would lead to some more severe problems. It’s always a better option to go with the quick action rather than regretting in future. A lot of issues can be handled easily by the homeowner but sometimes you have to take help from an engineer. Some of the faults in the central heating system can be minimised when you are installing it. Make sure you are only allowing the gas safe registered engineer to work in your home.central heating installation in Londonhave become competitive due to the high demand of heating devices in winter months and hence these devices need to be maintained properly in order to be used effectively during winters.
Central heating pump
What central heating pump does is, it circulates the hot water around the radiators. You may seem the pump in its smallest size but it has a significant role in heating your home. This is the pump which helps in pumping hot water back to the boiler which results in warming up your room that you enjoy.
Where the pump is located?
You can find the central heating pump close to the boiler itself. The reason for such location is that the pump can start circulating the water as soon as the boiler is done with the heating. It helps in warming up your entire room rather than clamping up some warm air in your cupboards.
What could be the possible reason for the noise?
If your boiler is making noises, it could mean that the limescale has built up. The kettling noise comes from the hard-water that has built up inside the boiler’s heat exchanger. You can remove the limescale that has been build up in the heat exchanger. You can use chemical descalers which will help in pumping out the excess limescale.
After that, you need to flush the system several times. Prefer using clean water. In order to avoid any corrosion, add some inhibitors to the system. Another reason for the noisy boiler is due to the low water flow. Modern boilers come up with specific flow rate that makes sure it sticks to your requirements
A lot of times, the air inside the central heating system can make heavy noises. Such issues happen when there’s an incorrect process of installation. Make sure to talk to the expert regarding the components being used at the time of installation. When it’s about the pump, the noise can be due to the cold radiators.
Often times, the vibrating units can create huge problems in the pump movement. You need to secure the vibrating unit in order to reduce the painful noises. You can install the brackets for that extra security. Sometimes, the excessive speed of the pump results in the high noises. You can turn it down and check if it solves the problem. If you experience that the water is heating up too slowly because of the pump speed, just call an experienced engineer
The best way to cure the central heating troubles is to identify the problems beforehand. For example:
The airlock issue
When the air gets trapped in the pump unit, it causes the blockage which obstructs the smooth flow of water. That’s why you get to hear that humming noise coming from it. Today, we have a full programming system which lets the trapped air to be released from it. All you have to do is to simply turn on the bleed screw and it will automatically release the excess air trapped inside.
Blockage
Often times the noise could be because of the rust that forms over time. If your boiler is making noises, it could mean that the limescale has built up. The kettling noise comes from the hard-water that has built up inside the boiler’s heat exchanger. This will affect the central heating pump as well which will also carry up the formation of such blockage. You can remove the limescale that has been build up in the heat exchanger. You can use chemical descalers which will help in pumping out the excess limescale.
After that, you need to flush the system several times. Prefer using clean water. In order to avoid any corrosion, add some inhibitors to the system.
Uneven speed settings
The modern heating system has all been equipped with the speed settings that don’t require any manual work. It can adjust the flow rate but many times you may experience issues like in 3 settings, the lowest will set the flow too slow while the highest will set it too fast. Whatever is the setting, make sure it goes with your central heating system.
Loose blades
Central heating pumps are protected with fans which help them to keep cool thus preventing the harms of overheating. If you ever encounter with noises, chances are that the blades have been fitted loosely. To help you understand better, listen to the noise of a metal clanking. That’s the noise you will get if you have a loose fitted fan.
When the central heating system becomes too hot
A slight warm is common as the machine heats up to give you that warm cosy atmosphere. If you think that it’s heating up too much and is very hot to touch then you may have some faults in it. Often times, such a situation happens because of the faulty motors. Such a problem arises when you haven’t been using the central heating system for a long time. The pump starts to heat up excessively, thus causing the main trouble.
The price of a central heating system
If you need to buy a new pump, it will cost you anywhere between £80- £200. Buying the cheapest pump could be a budget-friendly but you also have to consider the longevity which can only come with the premium products. Spending money on the cheap ones could lead you to spend huge bucks on replacement in the near future.
Haven’t got any relief?
If you have tried and tested on all of the above-mentioned indications to check what is the real problem of your central heating system and you haven’t yet reached for a proper solution. Now is the time to look at your installation. If your heating system is troubling you immediately after you have had the system installed, chances are the installation is the biggest culprit. Often times, the pump is fitted in a wrong way which results in such chaotic circumstances.
It’s very important to understand what your central heating system is pointing you when it is in trouble. That’s the language only you can understand and of course the technician. If you are having some strange problems with your heating system, don’t hesitate to get help from thecentral heating repairs in London. They have the answer to all of your heating problems.
Angelique Chrisafis is the Guardian’s Paris correspondent. She is responsible for churning out quality articles based on her research while keeping an eye on the tech world. She likes technology, gadgets, and food. Works as an individual contributor to the team.